Fine Coal Dryer

fine coal dryer

Fine Coal Dryer Machine Description

Fine coal is the high quality coal that has been mechanically processed by the coal washing plant to reduce the ash and sulfur content and remove some impurities, which is suitable for some specialized purposes. After the mechanical dewatering of fine coal, the moisture is still very high, which not only affects the coal quality, but also increases the transportation cost. We have developed the washed fine coal drying system for processing clean coal. The final moisture content of the fine coal can be less than 8%, and the particle size can be controlled below 8mm.

coal rotary dryer worksite

Advantages of Fine Coal Dryer Machine

♠ Adopt new type feeding and discharging device, eliminating the phenomenon of clogging, discontinuity, uneven feeding and returning of material, reducing the load of the dust removal system.
♣ Adopt downstream drying method. The flue gas and wet materials enter the dryer from the same side. The high temperature flue gas can be used to obtain high evaporation intensity. Low outlet temperature and high thermal efficiency.
♥ The operating parameters can be adjusted according to the characteristics of clean coal, and the material can form a material curtain in the dryer barrel, and the mass and heat exchange is more sufficient.
♦ The “zero horizontal thrust” is realized, which greatly reduces the wear of the retaining roller, and the cylinder runs stably and reliably.
♠ New internal structure, strengthening the cleaning and heat conduction of dispersed materials, and better adaptability to * New internal structure, strengthening the cleaning and heat conduction of dispersed materials, and better adaptability to material moisture and viscosity.

Composition of Clean Coal Drying Equipment

Clean coal dryer equipment is mainly composed of heat source, dispersing device, belt feeder, rotary drum, belt discharger, induced draft fan, discharger and power distribution cabinet.

single drum rotary dryer

Fine Coal Dryer Working Principle

As the cleaned coal materials have certain viscosity, the drying processes are divided into the following working areas:
1. Materials guiding area: The wet material contacts with the high-temperature hot air and evaporates water rapidly. The material is transferred to the next working area under the action of the guide plate with large guide angle.
2. Lifting and cleaning area: The wet material is lifted by the lifting board to form a material curtain, and it is easy to bond the drum wall when the material falls. As the equipment is designed with cleaning device, the cleaning device can reasonably clean the materials adhered to the inner wall. In this process, the cleaning device also plays a role in breaking the agglomeration of the material particles, thus increasing the heat exchange area and the drying rate.
3. Inclined lifting plate area: The wet coal in this area has been in a loose state of low moisture, and has no cohesiveness. After full heat exchange, the materials reach the required moisture and enter the final discharge area.
4. Discharge area: There is no lifting plate in this area, and the materials slide to the discharge port to complete the whole drying process.

lignite coal drying progress

Coal Dryer Working Site

Clean Coal Drying Machine Technical Parameters

Model

DDJMG2224

DDJMG2528

DDJMG2830

DDJMG3432

DDJMG4035

Capacity (TPD)

500

700

1000

1500

2000

Initial Moisture (%)

25-30

Final Moisture (%)

11±3

Power (kw)

128

143

260

320

460

Floor area (㎡)

28*40

8*45

10*50

12*50

15*55

1 thought on “Fine Coal Dryer”

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top